Suzuki GSX-R1000K5 - Removal

CHASSIS 8-53
REMOVAL
• Cut the drive chain. (8-86)
NOTE:
It is not necessary to cut the drive chain, unless replacing drive
chain or swingarm.
• Remove the rear wheel. (8-41)
• Remove the side-stand 1.
NOTE:
It is not necessary to remove the side-stand, unless when
replacing the cushion lever.
• Remove the brake hose guide 2.
• Remove the brake caliper from the swingarm.
• Remove the rear shock absorber. (8-49)
• Remove the cushion lever mounting bolt/nut 3.
• Remove the cushion lever 4.
NOTE:
Slightly loosen the cushion rod mounting bolt/nut A to facilitate
later disassembly.
• Remove the swingarm pivot shaft lock-nut with the special
tool.
 09940-14940: Swingarm pivot thrust adjuster socket
wrench
SAMPLE