Suzuki GSX-R1000K5 - Final Inspection and Adjustment

CHASSIS 8-61
SHOCK ABSORBER AND CUSHION LEVER MOUNTING NUT
• Install the washers A and cushion lever. (8-58)
• Tighten the cushion lever mounting nut 1 to the specified
torque.
 Cushion lever mounting nut:
78 N·m (7.8 kgf-m, 56.5 lb-ft)
• Assemble the cushion lever, cushion rod. (8-58)
 Cushion rod nut 2: 78 N·m (7.8 kgf-m, 56.5 lb-ft)
• Install the rear shock absorber. (8-51)
• Route the brake hose and install the brake hose guides.
(10-26)
• Install the rear wheel. (8-47)
• Install the side-stand. (10-36)
• Connect the drive chain. (8-87)
FINAL INSPECTION AND ADJUSTMENT
After installing the rear suspension and wheel, the following
adjustments are required before driving.
* Drive chain (2-21)
* Tire pressure (2-27)
SAMPLE