9-30 ELECTRICAL SYSTEM
REMOVAL AND DISASSEMBLY
• Remove the screws 1.
• With the hooked parts 2 of the combination meter pulled from
the headlight housing, disconnect the combination meter lead
wire coupler.
• Remove the combination meter.
• Disassemble the combination meter as follows.
When disconnecting and reconnecting the combina-
tion meter coupler, make sure to turn OFF the ignition
switch, or electronic parts may get damaged.
Do not attempt to disassemble the combination meter unit 2.
1 Combination meter cover 3 Combination meter case
2 Combination meter unit
SAMPLE
To Next Page
Loading...
