Suzuki GSX-R1000K5 - Engine Installation

3-10 ENGINE
• Remove the engine mounting nut 6.
• Loosen the engine mounting thrust adjuster lock-nut 7 with
the special tool.
• Loosen the engine mounting thrust adjuster 8.
 09940-14990: Engine mounting thrust adjuster
socket wrench
NOTE:
Do not remove the engine mounting bolts at this stage.
• Remove the engine mounting bolts and gradually lower the
front side of the engine. Then, take off the drive chain from the
driveshaft.
• Remove the engine assembly.
ENGINE INSTALLATION
Install the engine in the reverse order of engine removal.
Pay attention to the following points:
NOTE:
Be careful not to damage the frame and engine when installing
the engine.
• Before installing the engine, install the spacers 1.
• Before installing the engine, install the engine mounting thrust
adjusters 2 and 3.
SAMPLE