COOLING AND LUBRICATION SYSTEM 7-13
• Remove the oil seal using a suitable bar.
NOTE:
If there is no abnormal condition, the oil seal removal is not nec-
essary.
INSPECTION
MECHANICAL SEAL
• Visually inspect the mechanical seal for damage, with particu-
lar attention given to the sealing face.
• Replace the mechanical seal that shows indications of leak-
age. Also replace the seal ring if necessary.
OIL SEAL
• Visually inspect the oil seal for damage, with particular atten-
tion given to the lip.
• Replace the oil seal that shows indications of leakage.
IMPELLER SHAFT JOURNAL
• Visually inspect the journal for damage or scratch.
• Replace the water pump body if necessary.
SEAL WASHER
• Visually inspect the seal washer for damage, with particular
attention given to the sealing face.
• Replace the seal washer that shows indications of leakage.
The removed oil seal must be replaced with a new one.
SAMPLE
To Next Page
Loading...
