8-10 CHASSIS
REMOVAL
• Remove the brake calipers.
• Loosen two axle pinch bolts 1 on the right front fork leg.
• Remove the front axle bolt 2.
• Raise the front wheel off the ground and support the motorcy-
cle with a jack or a wooden block.
• Loosen two axle pinch bolts 3 on the left front fork leg.
• Draw out the front axle and remove the front wheel.
NOTE:
After removing the front wheel, fit the calipers temporarily to the
original positions.
• Remove the collar 4.
Do not operate the brake lever while removing the cal-
ipers.
Do not carry out the work with the motorcycle resting
on the side-stand. Do not support the motorcycle with
the exhaust pipe. Make sure that the motorcycle is
supported securely.
SAMPLE
To Next Page
Loading...
