COOLING AND LUBRICATION SYSTEM 7-5
• Fins bent down or dented can be repaired by straightening
them with the blade of a small screwdriver.
RADIATOR INSTALLATION
• Install the radiator.
• Route the radiator hoses. (10-24)
• Pour engine coolant. (2-17)
• Bleed air from the cooling circuit. (2-18)
• Install the under cowlings. (8-6)
WATER HOSE INSPECTION
• Remove the under cowlings. (8-5)
• Lift and support the fuel tank. (5-3)
• Any water hose found in a cracked condition or flattened must
be replaced.
• Any leakage from the connecting section should be corrected
by proper tightening.
SAMPLE
To Next Page
Loading...
