EXHAUST SYSTEM 6-5
• Remove the brake fluid reservoir tank mounting bolt 2 and
front footrest bracket mounting bolts 3.
• Move the front footrest assembly.
• Hold the EXCVA pulley with an adjustable wrench, and
loosen the pulley mounting bolt.
• Disconnect the No. 2 cable 4 and then No. 1 cable 5 from
the pulley.
• Remove the EXCVA.
* When loosening or tightening the pulley bolt, be sure
to fix the pulley with an adjustable wrench, or EXCVA
may get damaged.
* Do not use the adjustable wrench to turn EXCVA pul-
ley so as not to cause damage to the internal gear of
EXCVA.
SAMPLE
To Next Page
Loading...
