Suzuki GSX-R1000K5 - Page 337

8-14 CHASSIS
• Install the wheel bearings with the special tools as follows.
 09941-34513: Bearing/Steering race installer set
09924-84510: Bearing installer set

• Install the dust seal with the special tool.
 09913-70210: Bearing installer set (52 mm)
• Apply SUZUKI SUPER GREASE “A” to the dust seal lip.
 99000-25030: SUZUKI SUPER GREASE “A” (USA)
99000-25010: SUZUKI SUPER GREASE “A” (Others)
BRAKE DISC
• Make sure that the brake disc is clean and free of any greasy
matter.
• Apply THREAD LOCK to the disc mounting bolts and tighten
them to the specified torque.
 Brake disc bolt (Front): 23 N·m (2.3 kgf-m, 16.5 lb-ft)
99000-32130: THREAD LOCK SUPER “1360”
First install the right wheel bearing, then install the
spacer and left wheel bearing.
The sealed cover of the bearing must face outside.
Left
Right
Left
Right
Clearance
Spacer
SAMPLE