Suzuki GSX-R1000K5 - Page 361

8-38 CHASSIS
• Insert the protrusion A of the handlebars into the hole B of
the steering stem upper bracket.
• Tighten the front fork upper clamp bolts 1 and handlebar
clamp bolts 2 to the specified torque.
 Front fork upper clamp bolt: 23 N·m (2.3 kgf-m, 16.5 lb-ft)
Handlebar clamp bolt: 23 N·m (2.3 kgf-m, 16.5 lb-ft)
• Apply a handle grip bond onto the left handlebar before
installing the handlebar grip.
39442-09D00: HANDLE GRIP BOND
• Install the clutch lever holder, align the holder’s mating sur-
face C with punched mark D on the handlebar.
• Install the front brake master cylinder. (8-72)
Handle grip bond
Up side
SAMPLE