ENGINE 3-7
• Disconnect the ignition coil/plug cap lead wire couplers and
CMP sensor lead wire coupler.
• Remove the ignition coils/plug caps.
• Disconnect the PAIR hoses 8.
ENGINE SPROCKET AND GEAR SHIFT LEVER
• Remove the gearshift lever 1.
• Remove the engine sprocket cover 2.
• Remove the clutch push rod 3.
Do not remove the ignition coil/plug cap before dis-
connecting its coupler.
* Do not pry up the ignition coil/plug cap with a screw
driver or a bar to avoid its damage.
* Be careful not to drop the ignition coil/plug cap to
prevent its short or open circuit.
SAMPLE
To Next Page
Loading...
