3-32 ENGINE
• When compressing the valve spring, use a protector that is
handcrafted from a 35-mm film cartridge as shown in the right
illustration.
For intake side For exhaust side
A 7 mm (0.28 in) A 7 mm (0.28 in)
B 46 mm (1.81 in) B 46 mm (1.81 in)
C 24 mm (0.95 in) C 22 mm (0.87 in)
• Install the protector 3 between the valve spring and cylinder
head.
• Using the special tools, compress the valve spring and
remove the two cotter halves 4 from the valve stem.
09916-14510: Valve lifter
09916-14530: Valve lifter attachment
09916-84511: Tweezers
• Remove the valve spring retainer 5 and valve spring 6.
• Pull out the valve 7 from the combustion chamber side.
To prevent damage of the tappet sliding surface with
the special tool, use a protector.
SAMPLE
To Next Page
Loading...
