CLlITCH
oil
/0
all sur/aces
to
al'oid hal'ing the
clutch lock up when used for the firsl
time.
157
7.
Insta
ll
a
No.2
friction disc
(F
igur
e 37) and a
clutch plale
(f
igure
38).
8.
Continue to install the friction discs and clutch
plales. alternating them until all are installed. The
last item installed is the
No.
I (narrow) friclion
disc
(F
igure
39
).
9.
Insta
ll
the wave washer (Figure 40) with the
concave side facing outward.
10.
In
stall the wave washer seal (Figure
41
),
11.
Align the labs on the clutch disc
in
or
der
10
accept the clutch hub.
12.
Install the clutch hub (Figure
42
). Push the
clutch hub down through the clutch discs while
slightly wiggling it back and forth.
®
,
()
@
To Next Page
Loading...
