7-52 CHASSIS
• Install the brake drum.
NOTE:
Before installing the brake drum, make sure that the brake drum
is clean and free of any greasey matter.
• Install the drum cover and tighten the bolts.
NOTE:
When installing the drum cover, make sure that the O-ring must
be fitted into the groove on the brake panel securely.
• Connect the brake cables 1.
NOTE:
When connecting the brake cables, make sure that the
small-pitch portion of the cable spring faces the cable adjuster
nut.
• Install the wheel hub. (7-14)
• Install the rear wheel. (7-12)
• After installing the rear brake, adjust the following items.
*Brake pedal play ..... 2-12
*Brake lever play ...... 2-13
Do not apply grease to the spline portion of brake
drum.
To Next Page
Loading...
