CHASSIS 7-51
• Install the new O-ring to the brake panel.
• Apply SUZUKI SUPER GREASE “A” to the anchor pin and
brake camshaft sliding surface lightly.
99000-25030: SUZUKI SUPER GREASE “A” (USA)
99000-25010: SUZUKI SUPER GREASE “A” (Others)
• Install the brake shoes and springs to the brake panel.
NOTE:
* When reinstalling the removed brake shoes, install them in
their original position, leading and trailing.
* Make sure that the brake shoe spring’s end faces the brake
panel as shown.
Replace the removed O-ring with a new one.
Be careful not to apply too much grease to the brake
camshaft and pin. If grease gets on the lining, brake
slippage will result.
Replace the brake shoes as a set, otherwise braking
performance will be adversely affected.
To Next Page
Loading...
