14. FRONT BRAKE & FRONT WHEEL
14-5
Disassembly
Caution
y Never install used bearings. Once bearing
removed, it has to be replaced with new one.
Remove out side bearing and seal from wheel hub
using following tools.
Special tool:
Inner bearing puller
Remove front wheel hub bearing inner spacer.
Remove inner side bearing and oil seal from wheel
hub using following tools.
Special tool:
Inner bearing puller
Remove 4 socket bolts, and then remove the
brake disk from wheel hub.
To this chapter contents
Inner spacer
Inner bearing puller
Inner bearing puller
4 bolts
To Next Page
Loading...
