Symbol ES3000 - Page 206

ES3000 User Guide
5-38
storm-control threshold
Use the storm-control threshold command to configure the mulitcast storm control for a port.
storm-control threshold<threshold>
S
YNTAX DESCRIPTION: <threshold> Threshold value for a port (packets per second).
D
EFAULT VALUE:
C
OMMAND MODES: Global configuration
R
EFERENCE:Cisco
M
ENU: Basic Switch Configuration Menu->Storm->Set Threshold
E
XAMPLE:
! Set rate 3000 packets per second
Switch(config)# strom-control threshold 3000
Switch(config)#