Symbol ES3000 - Page 207

Command Line Interface
5-39
storm-control broadcast
Use the strom-control broadcast command to configure the broadcast storm control for a port.
storm-control broadcast
no storm-control broadcast
S
YNTAX DESCRIPTION: The storm-control broadcast command has no arguments or keywords.
D
EFAULT VALUE: The default value is disabled.
C
OMMAND MODES: Global configuration
R
EFERENCE:Cisco
M
ENU:
E
XAMPLE:
! Set broadcast storm control Enable
Switch(config)# strom-control broadcast
! Disable broadcast strom control
Switch(config)# no storm-control broadcast
storm-control multicast
Use the strom-control multicast command to configure the multicast storm control for a port.
storm-control multicast
no storm-control multicast
S
YNTAX DESCRIPTION: The storm-control multicast command has no arguments or keywords.
D
EFAULT VALUE: The default value is disabled.
C
OMMAND MODES: Global configuration
R
EFERENCE:Cisco
M
ENU:
E
XAMPLE:
! Set multicast storm control Enable
Switch(config)# strom-control multicast