ES3000 User Guide
5-40
! Disable multicast storm control
Switch(config)# no storm-control mutlicast
storm-control unicast
Use the storm-control unicast command to configure the unicast(DLF) storm control for a port.
storm-control unicast
no storm-control unicast
S
YNTAX DESCRIPTION: The storm-control unicast command has no arguments or keywords.
D
EFAULT VALUE: The default value is disabled.
C
OMMAND MODES: Global configuration
R
EFERENCE:Cisco
M
ENU:
EXAMPLE:
! Set unicast storm control Enable
Switch(config)# storm-control unicast
! Disable unicast storm control
Switch(config)# no storm-control unicast
To Next Page
Loading...
