Symbol ES3000 - Page 254

ES3000 User Guide
5-86
diffserv nomatch
Use the diffserv nomatch command to configure nomatch action for diffserv.
diffserv nomatch <index> [drop | policed-dscp <ds> | precedence <precedence> | cos
<cos>]
S
YNTAX DESCRIPTION: <index> No-match ID for diffserv
<ds> 6-bits DSCP value in IP header for action
<precedence> 3-bits TOS-precedence value in IP header for action
<cos> 3-bits priority value in VLAN TAG for action
D
EFAULT VALUE:
C
OMMAND MODES: Global configuration command
R
EFERENCE:
M
ENU:
E
XAMPLE:
! Create a no-match Index:2 , replace COS value to 3
Switch(config)# diffserv nomatch 2 cos 3
Switch(config)#
! delete a no-match Index 2
Switch(config)# no diffserv nomatch 2
Switch(config)#