Symbol ES3000 - Page 255

Command Line Interface
5-87
diffserv outprofile
Use the diffserv outprofile command to configure the out-profile for diffserv.
diffserv outprofile <index> committed-rate<unit> burst-size<volume>
[drop | dscp <ds>]
S
YNTAX DESCRIPTION: <index> Out-profile ID for diffserv
<meter-id> Meter ID for out-profiler
<ds> 6-bits DSCP value in IP header for action
D
EFAULT VALUE:
C
OMMAND MODES: Global configuration command
R
EFERENCE:
M
ENU:
EXAMPLE:
! Create a out-profile Index 4, set committed-rate to 23, burst-size 4 and
out-profile action drop.
Switch(config)# diffserv outprofile 4 committed-rate 23 burst-size 4 drop
Switch(config)#
! delete a out-profile 4
Switch(config)# no diffserv outprofile 4
Switch(config)#
diffserv portlist
Use the diffserv portlist command to configure the portlist for diffserv.
diffserv portlist <index> <portlist>
S
YNTAX DESCRIPTION: <index> Port-list Index for diffserv
<portlist> Port-list for diffserv
D
EFAULT VALUE:
C
OMMAND MODES: Global configuration command
R
EFERENCE:
M
ENU: