5: Function Reference
To change the Code Output selection enter:
F90 IRIG-B DC<CR>
XL-GPS responds:
OK<CR><LF>
Sample request for Time Code Out with IEEE 1344 extensions: F90<CR>
Response: F90 IRIG-120 1344
To enter the Code Output selection, send the following character string
to the Serial/Network port:
Sample entry: F90<SP>IRIG-B DC<CR>
Response: OK<CR><LF>
To enter the Code Output selection for Time Code with IEEE 1344
extensions, send the following character string to the Serial/Network
port:
F90<SP><CODE OUTPUT><CR>
where:
F = ASCII character F.
90 = function number.
<SP> = space
<CODE OUTPUT> = IRIG-B120 1344 or IRIG-B000 1344
<CR> = carriage return character.
<LF> = line feed character.
Sample entry: F90<SP>IRIG-B120 1344<CR>
Response: OK<CR><LF>
The Serial/Network port will respond with the message “ERROR 01 VALUE
OUT OF RANGE” if the input string was in the correct format but
contained a value, probably numeric, that was out of the range of
acceptable values.
The Serial/Network port will respond with the message “ERROR 02 SYNTAX”
if it receives a string in an incorrect format.
The Serial/Network port will respond with the message “ERROR 03
BAD/MISSING FIELD” if the input string lacks a required field.
IRIG-B120 1344
Page 106 of 221 .................................098-00116-000 Rev. A
To Next Page
Loading...
Need help?
General
