F100 – Network Port Configuration & XL-GPS Firmware
F100 IC – Network Port Settings
Use function F100 IC to review the entire configuration of the standard network port, enter:
F100<S>IC<CR>
An example of the response is:
F100 IP:206.54.0.21 SM:255.255.255.240 G:206.54.0.17<CR><LF>
F100 BASET – 10/100 BASE- T
The BASET command displays the data rate of the Ethernet port. On the current version of
the Main CPU card (089-00205-000) running the current system software version, the user
also has the option of selecting between 10 Base-T and Auto. If you have questions about
your unit, contact H: Sales and Customer Assistance(page204).
To display the current Base-T setting, enter:
F100<S>BASET<CR>
where
F
= ASCII character F
100
= unit function number
<S>
= Space
BASET
= specify Base-T command
<CR>
= input line terminator
XL-GPS responds:
F100 BASET 10T<CR><LF>
To set the Ethernet port to automatically negotiate the maximum connection speed, enter:
F100<SP>BASET<SP>AUTO<Enter>
To set the Ethernet port’s connection speed to 10Base-T, enter:
F100<SP>BASET<SP>10<Enter>
XL-GPS responds:
OK <CR><LF>
RESETING THE UNIT<CR><LF>
098-00116-000 Rev. A............................... Page 113 of 221
To Next Page
Loading...
Need help?
General
