5: Function Reference
F
= ASCII character F
100
= unit function number
<S>
= space
P
= specify Password command
<CR>
= input line terminator
XL-GPS responds:
ENTER NEW USER PASSWORD:
When you enter the new password, XL-GPS responds:
CONFIRM NEW USER PASSWORD:
Enter the same new password again, to confirm the spelling. If the same new password has
been entered twice, XL-GPS responds:
OK<CR><LF>
In this case, the new password will be used for the next login. However, if the new password
is entered differently the second time, XL-GPS responds:
ERROR: PASSWORDS DO NOT MATCH. NEW PASSWORD REJECTED.
F100 PI – PING
Use function F100 PI to ping a remote host to see if it is reachable. If no IP Address is
provided, F100 PI uses the XL-GPS’s own IP Address, and tests whether the XL-GPS’s
network port has a good network connection.
To ping a known host, enter:
F100 PI<S><IP Address><CR>
For example:
F100 PI 206.254.000.021<CR>
The unit responds (example):
PING 206.254.000.021: REMOTE HOST FOUND.<CR><LF>
or
PING 206.254.000.021 : REMOTE HOST NOT FOUND.<CR><LF>
Page 124 of 221 .................................098-00116-000 Rev. A