EasyManuals Logo

Symmetricom XL-GPS User Manual

Symmetricom XL-GPS
239 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #197 background imageLoading...
Page #197 background image
SNMP Private Enterprise MIB Structure
C: SNMP
The mibs for this product are available on the product CD.
Key:
MIB=/config/ttmib.o
,
Don’t touch. This is a factory setting.
GenTraps=YES,
Global enable/disable setting for all SNMP traps. YES, the default
setting, enables all traps. NO disables all traps. This setting overrides all
the other TRAP parameter settings.
NAME =
The community name password. This should be the same as the
community name being used by the administrators.
VIND =
View Index. This is a reserved term that has no effect and is currently
unused in SNMP. This parameter should be set to “1”.
TRAP =
YES enables/NO disables SNMP traps for a particular community.
ACCESS =
Read and write privileges to members of a community. R sets read only
privileges, and W sets read and write privileges.
IP =
Provide the IP address of the SNMP management stations within that
community. These addresses are required in order for the management
station to receive SNMP traps and to communicate with the XL-GPS
system using SNMP.
Note: A special address of 255.255.255.255 grants any IP addressed unit
access to the Enterprise MIB variables.
SNMP Private Enterprise MIB Structure
This section describes the top level structure & design of the XL-GPS SNMP Private
Enterprise MIB.
SNMP Addressing
SNMP addressing is structured as a very large tree database. A root node address is an
integer value that ranges from 0 to some very large number. Conceptually, there are no limits
to the numbers of sub nodes either. SNMP addressing is written in “doted decimal” notation.
For example the address of Symmetricom’s ntpInPkts Enterprise MIB variable is
“1.3.6.1.4.1..1896.6.1.2.1.1.0. The address fragment 1.3.6.1.4.1 is fixed by the IANA
(Internet Assigned Number Authority) and is the address of the SNMP Private Enterprise
MIB’s. The 1896 is the address assigned by IANA to Symmetricom for our Enterprise MIB’s.
Symmetricom assigns the addresses after that at our discretion and design.
098-00116-000 Rev. A............................... Page 183 of 221

Table of Contents

Other manuals for Symmetricom XL-GPS

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Symmetricom XL-GPS and is the answer not in the manual?

Symmetricom XL-GPS Specifications

General IconGeneral
BrandSymmetricom
ModelXL-GPS
CategoryReceiver
LanguageEnglish

Related product manuals