Symmetricom XL-GPS User Manual

6: Option Cards
10 MHz Sine Output LPN Option Card (87-8114)
This option provides four Low Noise 10MHz frequency output signals. The option is RoHS
compliant and available with the optional OCXO oscillator, which is internally cabled to the
oscillator installed in the XL-GPS.
Signal Type: Analog sine wave
Synchronization:
Phase coherent to the clock 10MHz and 1PPS to within
10ns
Amplitude: +13 dBm ±1.5 dBm, into 50 Ω
Qty: four
Connector: BNC female
Physical: Single high option bay (four outputs)
Harmonic dis-
tortion:
-30 dBc
Spurious: -60 dBc
Isolation: -60 dBc
Phase Noise: -90 dBc/Hz @ 1 Hz offset
-120 dBc/Hz @ 10 Hz offset
-135 dBc/Hz @ 100 Hz offset
-145 dBc/Hz @ 1 kHz offset
-145 dBc/Hz @ 10 kHz offset
Note: Follow good ESDprecautions when handling this board.
Page 160 of 221 .................................098-00116-000 Rev. A

Symmetricom XL-GPS Specifications

General

Brand	Symmetricom
Model	XL-GPS
Category	Receiver
Language	English