4: User Interfaces
200:21:24:09
where:
DDD = Day of year
HH = Hours
MM = Minutes
SS = Seconds
Time Display related functions:
• Select between the 12 or 24 hour format displayed: “F2 – 12/24 Hour Format” on
page50.
• Select between Local, Standard, UTC, and GPS time: “F69 – Time Mode” on page
90.
Time related functions:
l
“F1 – Time Zone Offset” on page48
l
“F3 – Time & Date” on page52
l
“F66 – Daylight Saving Time (DST) Mode” on page84
Status Display
The Status Display comes up automatically when the XL-GPS is rebooted. To manually
switch from another display to the Status Display, press STATUS button on the keypad. The
keypad appears as follows:
<STATUS> <*> <REF CLK>
<TYPE> DDD:HH:MM:SS YYYY
For example:
LOCKED * GPS
UTC 200:21:24:09 2009
where:
LOCKED =
System Clock Status is Locked or Unlocked to the current reference source. See Clock
Status in “F73 – Alarm Control / Status” on page95
* =
A reference source input has been configured, but is not available. (Note: When using
GPS, “*” may remain visible for up to 13 minutes) See “F119 – GPS Receiver
Configuration” on page143
Page 38 of 221 .................................098-00116-000 Rev. A
To Next Page
Loading...
Need help?
General
