2: System Specifications
SS seconds 00-59 (60 during leap seconds)
MM minutes 00-59
HH hour of day 00-23
DDD day of year 001-366
<control> 27 binary control characters
<binary seconds> binary seconds of day
Output:
Amplitude (AM): 3 Vp-p ±10%, into 50Ω
Ratio (AM): 3:1 ±10%
Qty: 1
Connector: BNC female
Phasing:
In phase with the XL-GPS 1PPS ± 10 mS
Time Code Output IRIG-B000 200-04 W/ IEEE1344
The selectable Code output provides a selection for IRIG-B-000 w/ IEEE1344, (IRIG
A000 and NASA 36 are also available as outputs). Configuration is made via the:
l Keypad / Display
l RS232/422 9600
l Network port via telnet
IRIG-B-000 IS DEFINED IN IRIG STANDARD 200-04 AS:
Format B 100 pps
0 = Pulse width code
0 = No carrier/index count interval
0 = BCDTOY,CF,SBS
IEEE1344 is defined in IEEE Std C37.188
TM
-2005, (See section 3.3 definition)
Page 12 of 221 .................................098-00116-000 Rev. A