Error Messages
7: XL-GPS Generated Messages
Error Messages
ERROR 01 VALUE OUT OF RANGE
You entered a command using the correct format that contained a value, probably numeric,
that was outside the range of acceptable values.
Recovery Action: Re-enter the command using an acceptable value.
ERROR 02 SYNTAX
You entered a valid command, but using the wrong format.
Recovery Action: Re-enter the command, using the correct format.
ERROR 03 BAD/MISSING FIELD
You entered a command that lacks a required field.
Recovery Action: Re-enter the command, using the required fields.
ERROR 04 - BAD DATA/TIMEOUT CONDITION
The internal GPS receiver did not respond to the XL-GPS soon enough.
Recovery Action: Re-enter the command, using the required fields.
ERROR: Invalid Command
You have entered an invalid command.
Recovery Action: Consult the manual for the correct command and re-enter.
ERROR: Can’t create netdevice <NAME>
The XL-GPS can not create the device needed to map the host to a drive.
Recovery Action: Restart the Unit. If this error message persists, contact Symmetricom
Technical Customer Service.
ERROR: Can’t set host <NAME> ip <ADDRESS>
098-00116-000 Rev. A............................... Page 167 of 221