5: Function Reference
O = ASCII letter indicating output port.
<C> = channel number, 1 to 4.
<CODE>= IRIG B 120, IRIG B 123, IRIG E 111,
IRIG E 112, IRIG E 121, IRIG E 122, IRIG H 111, IRIG H 112, IRIG H 121, IRIG H
122, 2137, XR3, NASA 36
IRIG-A 133 (will be applied to all IRIG-A assigned ports)
IRIG-G 141 (will be applied to all IRIG-G assigned ports)
IRIG-G 142 (will be applied to all IRIG-G assigned ports)
<LT> = Line Terminator, a Carriage Return and Line Feed for output strings or a Carriage
Return for input strings.
and the serial port will respond with the following ASCII string:
OK<CR><LF>
The following example sets port 2 to IRIG-B 123:
F42 O 1 IRIG-B 123
and the serial port will respond with the following ASCII string:
OK<CR><LF>
The following example sets port 1 plus all ports that have been assigned to IRIG-A, the out-
put time code of IRIG-A 133:
F42 O 1 IRIG-A 133
and the serial port will respond with the following ASCII string:
OK<CR><LF>
The Multicode output card Time Reference setup may be requested using the following
command:
F42<SP>T<CR>
Where:
<SP> = ASCII space character.
T = ASCII letter requesting Time Reference.
Page 70 of 221 .................................098-00116-000 Rev. A
To Next Page
Loading...
Need help?
General
