SYNAPTICON SOMANET Node 400 User Manual

Figure 6: Choose the configuration file to be uploaded to the
slave
4. Change the name to “config.csv” and click “OK” , as shown in Figure 7.
Figure 7: Edit FOE
name
5. A progress bar can be seen at the bottom of the page in TwinCAT 3 after the FOE operation (see Figure 8)
Synapticon Documentation
© 2021 Synapticon GmbH | Daimlerstraße 26 | D-71101 Schönaich Documentation v 4.11.0 | Built 2021-07-23 883/887

SYNAPTICON SOMANET Node 400 Specifications

General

Brand	SYNAPTICON
Model	SOMANET Node 400
Category	Servo Drives
Language	English