SYNAPTICON SOMANET Node 400 User Manual

instead of creating such a partition you can also use this workaround:
Close the VMware Player
Run
sudo gedit /etc/vmware/config
Add
prefvmx.minVmMemPct = "100"
at the end of the file and save
Restart the VMware Player
2.1.2.3 Connecting to OBLAC Drives
Once your virtual machine is powered up, you will find the IP address of OBLAC Drives at the top of the screen.
Enter this IP address in your browser and wait for OBLAC Drives to show the connected drives.
Synapticon Documentation
© 2021 Synapticon GmbH | Daimlerstraße 26 | D-71101 Schönaich Documentation v 4.11.0 | Built 2021-07-23 324/887

SYNAPTICON SOMANET Node 400 Specifications

General

Brand	SYNAPTICON
Model	SOMANET Node 400
Category	Servo Drives
Language	English