SYSMEX CyFlow Ploidy Analyser - Sample Port with Electrodes; Type Plate; Figure 5: Type Plate

To Next Page

To Previous Page

4 Overview

CyFlow™ Ploidy Analyser | Operating Manual | October 2021

4.2.4 Sample port with electrodes

The Sample port is located on the right side of the device.

It holds the Sample tube during the measurement. The start and stop electrodes of the

Sample port allow the independent determination of exactly 200 μl volume for each

sample. The method of True Volumetric Absolute Counting (TVAC) supported by

CyFlow™ Ploidy Analyser systems is based on the precise measurement of a fixed

sample volume.

4.2.5 Type plate

The type plate is attached to the rear side of the device.

The shows information on the type plate varie according to the system configuration. The

system configuration is represented by the REF number (e.g. CY-S-3039_V1).

Figure 5: Type plate

Table 6: Type plate symbols

Item

Manufacturer

Manufacturer name and address

Manufacturing Date

Serial Number

Reference Number

CE mark

Waste of Electrical and Electronic Equipment

Other manuals for SYSMEX CyFlow Ploidy Analyser