SYSMEX CyFlow Ploidy Analyser - Measure (Sample Port); Figure 34: Measure Register

13 Software
CyFlow™ Ploidy Analyser | Operating Manual | October 2021
69
13.4.10 Measure (Sample Port)
Figure 34: Measure register
Automatic functions
Property
Description
Autostart
Activates automatic start of acquisition. With each new Sample
tube the next measurement will be started until the [Stop] button
is pressed.
Autosave
Activates automatic data storage at the end of the
measurement.
INFORMATION
Autosave
Autosave does not work, if the measurement is manually finished by
clicking [end].