When screwing or unscrewing a bottle and its respective cap, it is
advantageous to twist the bottle instead of the cap.
The tubing must stay unbent.
1. Unscrew the Sheath Fluid bottle.
2. Secure cap and tubing on a clean surface in a stable manner.
3. Dispose of Sheath Fluid according to your local legislation and its associated
labelling.
4. Screw down the cap by turning the bottle. Do not twist the tubing and the sensor
cable. Close the bottle tightly.
5. Wipe bottle with clean cloth.
6. Dispose of cloths.
To Next Page
Loading...
