SYSMEX CyFlow Ploidy Analyser - Accessories and Spare Parts; Transport and Storage

5 Transport and storage
CyFlow™ Ploidy Analyser | Operating Manual | October 2021
23
4.6 Accessories and spare parts
The table below lists the accessories and spare parts used on a CyFlow™ Ploidy
Analyser.
For a complete list of available accessories and spare parts please visit our website or
contact your local Sysmex representative.
Table 9: Accessories and spare parts
Item
Content
REF No.
Sheath Fluid bottle 1 l
1000 ml empty bottle
04-200-1041
Waste bottle 1 l
1000 ml empty bottle
04-200-1042
Waste bottle 5 l
5000 ml empty bottle
04-200-1058
Cap for 1 l glass Sheath Fluid bottle
1 piece (incl. level
sensor)
04-200-1047
Cap for 1 l glass Waste bottle
1 piece (incl. level
sensor)
04-200-1048
Cap for 5 l glass Waste bottle
1 piece (incl. level
sensor)
04-200-1054
Sample Tubes 3.5 ml
500 piece
04-2000
Keyboard
1 piece
06-500-1040
Mouse
1 piece
06-500-1041
Spare fuses T 3.15 A
5 piece
06-7-8005
Inline Filter for Sheath Container
10 piece
04-004-1000
CellTrics™ 30 µm
50 piece
04-0042-2316
CellTrics™ 50 µm
50 piece
04-0042-2317
CellTrics™ 100 µm
50 piece
04-0042-2318
The functionality of the CyFlow™ Ploidy Analyser can be extended by installing a
CyFlow™ Robby 6 Autoloading Station.
Item
Content
REF No.
CyFlow™ Robby 6 Autoloading Station
All material to enable
autoloading included.
CY-S-3080-6
5 Transport and storage
In order to transport the device to a different location all external data and supply
connections have to be disconnected.
The device should be carried in an upright position.
The device is supplied in packaging that protects it against damage and contamination.
Please retain the packaging. Place the device in the packaging for transport and storage.
The storage environment must be dry, clean and dust-free:
• Storage temperature: between 5 °C and 50 °C;
• Relative humidity: between 20 % and 85 %, non-condensing.