SYSMEX CyFlow Ploidy Analyser - Acquisition; Figure 33: Acquisition Register

13 Software
68
CyFlow™ Ploidy Analyser | Operating Manual | October 2021
13.4.9 Acquisition
Multiple trigger parameters are logical “OR” connections.
Figure 33: Acquisition register
Property
Description
Light Source
UV LED
Switch UV LED light source ON / OFF
Laser
Switch laser light source ON / OFF
Trigger Parameter
DNA
Switch “DNA” trigger parameter ON /OFF
Gain Settings
DNA
The bars set the PMT signal amplification for the individual
optical parameter in voltage (0 – 999 V)
Thresholds
DNA
The bars set the cut off level for trigger signals
(left-click shows the cut off level in V)
Fluidics
Flow Rate
Sets the speed of sample flow in µl/sec