SYSMEX CyFlow Ploidy Analyser - Technical Data; Device Specifications

14 Technical data
72
CyFlow™ Ploidy Analyser | Operating Manual | October 2021
14 Technical data
INFORMATION
This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to part 15 of the FCC Rules. It has also
been tested and found to comply with the CE directive for Electomagnetic
Compatibility.
These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions for use, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is
likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
14.1.1 Device specifications
Specification
Description
Dimensions
Length: 385 mm
Depth: 282 mm
Height: 287 mm
530 mm with open display
Weight
approx. 18 kg
Maximum sound
<70 dBA
Power level
200 VA
Overvoltage category
2/II
Degree of protection
IP 20
Operating Environment
Temperature: 15-30 °C
Humidity: 20-85% relative (non-
condensing)
Clean environment. Avoid direct sunlight.
Applications
DNA Genome Size Analysis, Ploidy
Analysis
True Volumetric Absolute Counting
Based on precise counting and
mechanical fluid volume measurement.
No need for reference sample or beads.
Instrument Operation
Sheath Fluid
(REF No. 04-4007_R)
Instrument Check
DNA Control UV
(REF No. 05-7302)
DNA Control PI
(REF No. 05-7303)
Instrument Cleaning
Cleaning Solution
(REF No. 04-4009_R)