CyFlow™ Ploidy Analyser | Operating Manual | October 2021
2.2 Typographical conventions
2.2.1 Safety information
Safety information and warnings are marked by symbols and signal words. Hazards are
categorised into four levels. All warnings are structured according to the same model. The
type of hazard is stated after the signal word. Then the consequences that may result
from the hazardous situation are described. And finally, how the hazardous situation can
be avoided. If applicable a hazard symbol is portrayed, to indicate the kind of hazard.
Names the source of the hazard
Describes the consequences of the hazard. This will result in death or
severe personal injury.
• Specifies the steps that must be taken to eliminate the hazard.
Names the source of the hazard
Describes the consequences of the hazard. This could result in death or
severe personal injury.
• Specifies the steps that must be taken to eliminate the hazard.
Names the source of the hazard
Describes the consequences of the hazard. This could result in minor
injury.
• Specifies the steps that must be taken to eliminate the hazard.
Names the source of the hazard
Describes the consequences of the hazard. This could result in material
damage.
• Specifies the steps that must be taken to eliminate the hazard.
Gives further information about the device or procedure.