Sample port electrodes
The Sample port electrodes are most sensitive and are easily
damageable, which causes incorrect measurement volume and therefore
incorrect results.
• Only Authorised service personnel must clean the Sample port and
its components.
• Do not touch the Sample port electrodes.
Harmful substances
Inadequate cleaning and disinfection of the device exterior result in
damages to the device.
• Always use alcoholfree and benzenefree cleaning agents for cleaning
the device housing.
Cleaning the housing
Carefully clean the outer housing of the device on a regular basis.
Requirements
• Clean cloth dipped with disinfective agent
• Clean cloth
Procedure
4. Wipe the outer housing and components with disinfective agent
5. Dry the outer housing and components with a clean cloth
6. Dispose all used cloths
Cleaning the display
Always use a screen cleaner agent to clean the display.
Requirements
• Clean cloth dipped with screen cleaner
Procedure
3. Wipe the display gently until its surface is clean
4. Dispose all used cloths
To Next Page
Loading...
