SYSMEX CyFlow Ploidy Analyser - Open (.Fcs); Save (.Fcs); Open Configuration; Save Configuration

13 Software
CyFlow™ Ploidy Analyser | Operating Manual | October 2021
53
INFORMATION
Data Files
Measurement data will be stored in the FCS format. The FCS file will
contain all measured data and the measurement settings (e.g. plot layout,
trigger, gain values, etc.)
Compensations will be included in the FCS file. For more information,
please refer to chapter 0
• Compensation.
• The CFG file (*.cvc85) will contain the measurement settings only
(e.g. plot layout, trigger, gain values, etc.).
13.3.1 Open (.fcs)
Stored FCS files can be loaded by choosing[File]>[Open (.fcs)] in the dropdown menu or
using the file operations button.
13.3.2 Save (.fcs)
To store data, choose [Save (.fcs)] in the dropdown menu or the file operations button.
To set a default data storage folder when using [Save (.fcs)], open the “File” dropdown
menu, select [Set manual FCS-File directory...] and choose a folder. This path will not be
the default path for automatical saving.
NOTICE
Autosave
Data can be automatically saved using the [Autosave] auto-flag. When
autosaving, FCS files will be labelled with consecutive numbers. For more
information, please refer to chapter 13.4.10 Measure (Sample Port).
13.3.3 Open Configuration
To load a configuration file (*.cvc85), choose the dropdown menu item [Open Configuration
(.cfg)] or the file operations button.
13.3.4 Save Configuration
To store a configuration file (*.cvc85) choose the dropdown menu item [Save Configuration
(.cfg)] or the file operations button.