Technogym TOP 600 XT PRO - Troubleshooting Common Problems

28
TOP 600 XT PRO
1.4.3 Troubleshooting
The following list identifies a series of problems that could arise during normal use of the
equipment. In the event that the suggested remedies do not resolve the problem, contact
Technical Support Service for a service call.
Problem
The equipment does not
turn on
Too noisy
Cause
The power cord in not
plugged in.
No current.
The power cord
in damaged.
Problems with installation
of power cord.
The fuses have blown.
The control panel connector
has been accidentally
disconnected.
The equipment’s support
is uneven.
The bearings are damaged.
The alternator is damaged.
The transmission belt
is worn out.
Remedy
Plug the power cord
into the wall socket.
Check the socket
the equipment uses,
plugging in other equipment
you know
is in working order.
Contact Technogym
Technical Support Service.
Check the connection.
To replace the blown fuse
with a spare (F 3A) Contact
Technogym Technical
Support Service.
Contact Technogym
Technical Support Service.
Check and level
the equipment, using
the rear adjustment feet.
Contact Technogym
Technical Support Service.
Contact Technogym
Technical Support Service.
Contact Technogym
Technical Support Service.
2_Top_En.P65 30/05/2002, 13.5628