51
3.1 TURNING THE EQUIPMENT ON AND OFF
To turn off the equipment, move the switch (A)
next to the power cord to the “0” position.
Turn off the equipment only at the end of the
workout and when it is in Standby.
If the equipment is not used for an extended
period of time, it is advisable to unplug it from
the wall outlet after turning it off.
WARNING
The power switch is used to turn the
equipment on and off, but it does not
completely isolate it from network
current even when it is in the “0” (off)
position. To completely isolate the
equipment, the power plug must be
removed from the power outlet.
32
A
2_Top_En.P65 30/05/2002, 13.5651
To Next Page
Loading...
