1730–Series Checks and Adjustments
5–9
s. Check DC RESTORER with loss of burst.
13. Flat Response
d. Check CH–B flat response.
g. Check CH–B X5 flat response.
j. Check CH–A X5 flat response.
l. Check CH–A flat response.
14. PIX MON OUT Frequency Response
d. Check Frequency Response.
15. Transient Response
c. Check preshoot, overshoot, and ringing.
d. Check pulse-to-bar ratio.
e. Check bar tilt.
g. Check field tilt.
k. Check chrominance-to-luminance gain and delay error.
16. X5 Transient Response
d. Check preshoot, overshoot, and ringing.
e. Check pulse-to-bar ratio.
17. Low Pass Filter Response
e. Check amplitude difference from Flat to Filter.
18. Chroma Filter Response
d. Check CHROMA Filter gain.
g. Check CHROMA Filter cutoff.
19. Return Loss
e. Check Input loop-through return loss.
h. Check PIX MON OUT return loss.
To Next Page
Loading...
