1730–Series Checks and Adjustments
5–3
For example: TEKTRONIX DM504A in a TM500 Series Power Module.
6. Frequency Counter
Range, 100 kHz to 5 MHz; accuracy, ±0.001%.
For example: TEKTRONIX DC503A in a TM500 Series Power Module.
7. Video Amplitude Calibrator
Signal, adjustable square wave 0.0 to 999.9 mV p-p with a resolution of 0.1
mV and an accuracy of 0.05%; frequency approximately 270 Hz.
For example: TEKTRONIX 067–0916–00 in a TM500 Series Power
Module.
8. Power Module
for powering and housing TEKTRONIX DM501A, DC503A, FG503,
067–0916–00, and 015–0408–00.
For example: A TEKTRONIX TM506 Power Module.
9. Variable Autotransformer
For example: General Radio Metered Auto Transformer W10MT3W. If 220
volt operation must be checked, a conversion transformer or appropriate 220
volt autotransformer is needed.
10. Spectrum Analyzer with Tracking Generator
Bandwidth 10 MHz and sensitivity to 50 dB.
For example:
TEKTRONIX 2712 Opt 04
11. Peak to Peak Detector Amplifier and Detector Head
Facilitates differential frequency–response measurements. Provides a
high–impedance load and bias for the Peak To Peak Detector Head.
For example: TEKTRONIX 015–0408–00 Peak To Peak Detector Amplifi-
er, includes one 015–0413–00 Peak To Peak Detector Head.
Auxiliary Equipment
To Next Page
Loading...
Need help?
General
