1730–Series Options
7–2
from these ventilating holes. A drawing of this cabinet, that can be used in
mounting the cabinet, is located in Section 3 (Installation) of this manual.
This is a silver–grey, metal cabinet, with feet and carrying handle designed for
portable applications. A TEKTRONIX BP1 can easily be mounted to this
cabinet to provide a 12 Vdc power source for portable operation.
This is a 19–inch, rack mounting adapter that accepts two 1700–Series instru-
ments in a side–by–side configuration. Instrument cabinets are 1700F00 that are
connected together for this installation. If only one 1700–Series instrument is to
be installed in the Side–by–Side Rack Adapter, a blank panel (1700F06) can be
installed for air flow protection, and appearance.
When only one side of a 1700F05 dual rack adapter is used, this blank panel can
be installed in the other half to improve appearance and protect air flow.
When only one side of a 1700F05 dual rack adapter is used, an alternate to the
1700F06 blank panel is the 1700F07 utility drawer. This drawer provides over
1/3 cubic foot of storage space for accessories. The drawer kit includes a tray,
which is permanently mounted to the 1700F05. The drawer opens and closes
readily, unless latched for transport. The drawer can also be removed from the
drawer tray by lifting up and out.
Ordering
Any of these items can be ordered with the 1730–Series instrument. In addition,
these items are available, along with accessory items listed in this manual, from
your nearest Tektronix field office or distributor. Be sure to include both the
name and number of any Field Upgrade Kits ordered.
Carrying Case (1700F02)
Side–by–Side Rack
Adapter (1700F05)
Blank Panel (1700F06)
Utility Drawer (1700F07)
To Next Page
Loading...
Need help?
General
