Tektronix 2212 User Manual

Cursors
Li Vt, LiV2, LiV, LiVX, LiVY and RATIO
Cursor Functions
5 - 32
Ll Vl Cursor Function
With the cursor mode switch in the ~Vl mode, two horizontal
cursors are displayed on the screen. The vertical mode switch is
set to the CH1 position. ~ Vl is represented in the crt readout dis-
play by the distance between the two cursors and expressed in an
equivalent voltage.
The VOL TS/DIV scaling for this measurement mode is defined by:
- The setting of the CH 1 VOL TS/DIV switch.
- The probe encoding (1X, 10X, 100X).
Ll V2 Cursor Function
With the cursor mode switch in the ~V2 mode, two horizontal cur-
sors are displayed on the screen. The vertical mode switch is set to
the CH 2 position. ~ VZ is represented in the crt readout display by
the distance between the two cursors and expressed in an equiva-
lent voltage.
The VOL TS/DIV scaling for this measurement mode is defined by:
- The setting of the CH 2 VOL TS/DIV switch.
- The probe encoding (1X, 10X, 100X).
Ll V Cursor Function
The cursor type is displayed in the crt readout as ~ V when the
vertical MODE switch is in ADD position and both vertical
channels have the same deflection factor (VOL TS/DIV switch set-
ting).
~ V is represented in the crt readout display by the distance
between the two cursors and expressed in an equivalent voltage.
In Detail

Tektronix 2212 Specifications

General

Brand	Tektronix
Model	2212
Category	Test Equipment
Language	English