Tektronix 2212 - Making Hardcopies; User Text on; Figure 5-8: Hardcopy Menu Settings

Making
Hardcopies
All 2212 's have a HARDCOPY MENU installed (see Figure 5-8).
The Parallel Printer (Parallel I/0 Port) Interface is designed for con-
necting to printers with a Centronics ® compatible interface, via the
25-pin D type female connector.
Tektronix 2212 V2.2.20
nenu: HARDCOPY GPIB RS232
port: CEm'RONICS GPIB RS232
driver: HPGL EPS FX EPS_LQ T •
size: SMALL OORMAL FULL_REx:
grat:
OFF CROSS DIVS FULL
user text :OFF ,OH
"Tektronix 2212"
¢= • <cursor position> .U. <cursor select>
exit <menu>
a-Z<trigger level>
Figure 5-8: HARDCOPY Menu Settings
HAROCOPY Menu
To make a hardcopy of the record, the HARDCOPY menu must be
set. Therefore, press Save + Recall in the Setup function block). In
the HARDCOPY menu you can make the following selections (see
also Figure 5-8):
2212 User Manual
Rev. 5/93
5- 45