Tektronix 2212 User Manual

These symbols appear on equipment:
"
@
&
DANGER
Protective
ATTENTION
High Voltage
ground( earth) Refer to
terminal
manual
Specific Precautions
Observe all these precautions to ensure your personal safety
and to prevent damage to the 2212 or to the equipment con-
nected to it.
Power Source - Use the proper power source. This product is
intended to operate from a power source that does not apply
more than 250 V rms between the supply conductor or between
either supply conductor and ground. A protective ground con-
nection, by way of the grounding conductor in the power cord,
is essential for safe operation.
Grounding the Product - This product is grounded through the
grounding conductor of the power cord. To avoid electrical
shock, plug the power cord into a properly wired receptacle
before making any connections to the product input or output
terminals. A protective ground connection by way of the
ground conductor in the power cord, is essential for safe opera-
tion.
Danger Arising from Loss of Ground - Upon loss of the protec-
tive-ground connection, all accessible conductive parts
(including knobs and controls that may appear to be insulated )
can render an electrical shock.
Use the Proper Power Cord - Use only the power cord and
connector specified for your product.
Use only a power cord that is in good condition.
Use the Proper Fuse - To avoid fire hazard, use only a fuse of
the correct type, voltage rating and current rating specified on
the back of your instrument and in the Options and Accesso-
ries section.
2212 User Manual
1-3

Tektronix 2212 Specifications

General

Brand	Tektronix
Model	2212
Category	Test Equipment
Language	English