Commands
TDS5000B Series Service Manual
5-27
DIAg:NAMe:AREA?
This query-only command returns the selected area of the current diagnostic test.
There are three levels of diagnostic test hierarchy: subsystem, area and test. This
command is equivalent to selecting Instrument Diagnostics from the Utilities
menu, and then reviewing the Diagnostic S tatus.
This query can be issued while diagnostics are still in progress.
DIAg:NAMe?, DIAg:NAMe:SUBSYS?, DIAg:NAMe:TEST?
DIAg:NAMe:AREA?
DIAg:NAMe:AREA?
This query might return
:DIAG:NAME:AREA “Memory”
indicating the selected area name of the currently selected diagnostic test.
DIAg:NAMe:SUBSYS?
This query-only command returns the subsystem of the current diagnostic test.
This command is equivalent to selecting Instrument Diagnostics from the
Utilities menu, and then reviewing the Diagnostic Status.
This query can be issued while diagnostics are still in progress.
DIAg:NAMe?, DIAg:NAMe:AREA?, DIAg:NAMe:TEST?
DIAg:NAMe:SUBSYS?
DIAg:NAMe:SUBSYS?
This query might return
:DIAG:NAME:SUBSYS “Acquisition”
indicating the subsystem name of the current diagnostic test.
Related C ommands
Syntax
Example
Related C ommands
Syntax
Example
To Next Page
Loading...
